Discontinued
Call 1-866-224-6171 for details.
(0 Reviews)
PID: 2
Authorized Dealer
Pioneer Elite VSX-27TX Details
Designed for advanced digital processing of Dolby Digital, DTS, THX processing, Midnight Mode and Digital Noise Reduction, the VSX-27TX brings advanced theater sound into the home. Midnight Mode, which is compatible with any surround format, has been developed to deliver a full multichannel surround sound experience, but at lower listening levels. Laser Disc owners will be happy to know that an AC-3 RF Demodulator is built in so that you can fully enjoy soundtracks on LaserDisc recorded in Dolby Digital. To ensure your speakers get the full brunt of this receiver's Direct Energy MOSFET power, rugged Banana Terminals are used. Lastly, there's the Illuminated Smart Remote that has the ability to send macro commands and power down your entire Elite system with the press of a single button.
Pioneer Elite VSX-27TX Specifications
Amplifier Design & Power Output
Product Specifications
Amplifier Section
- Direct Energy MOS Amplifiers
- High Current Voltage Power Supply
- Extra Large Extruded Aluminum Heat Sink
- Stereo: 120W/ch
- Front (x2): 120W/ch
- Center: 120W
- Rear (x2):120W/ch
- 6 ohm Guaranteed
- THX Ultra
- Dolby Digital
- dts
- Dolby Pro Logic
- Advanced Theater Modes
Musical, Drama, Action 5-D Theater - DSP Modes
Dance, Hall 1, Hall 2, Jazz, Theater 1, Theater 2 - Midnight Mode
- Digital Noise Reduction
- Motorola DSP56362 Processor
- 24-bit Analog-to-Digital Converters
- 96kHz/24-bit Digital-to-Analog Converters
- Electric Tone Controls
- Electric Main Channel Balance
- Loudness Bass Boost (Stereo Only)
- Source Direct Switch
- Motor Driven Volume Control
- Remote Control Muting
- Graphic User Interface (On-Screen Display)
- 2 Line Dot Matrix Display
- 3-step FL Dimmer
- Multi-Operation System (Up to 8 Commands)
- Illuminated Smart Remote Control
DVD, DSS, Multi-CD Conrtol; HDTV Control - 30 Tuner Presets
- Multi-Room & Multi Source
Fixed and Variable MR/MS Audio Output, 3rd Party IR Compatibility - Front Panel Controls
- Multi-Source Functions
Tuner, CD, Tape 1, VCR 1, VCR 2, DVD/LD, TV/Sat
- 5.1 Channel Decoder Input
- AC-3 RF Input (with Internal Demodulator)
- 4 Digital Inputs
- 2 Coaxial
- 2 Optical
- 1 Digital Output (Optical)
- 5 Audio (TUNER Included) Inputs
- 5 Video Inputs
- Phono Input
- 2 Audio/Video Outputs
- 1 Monitor Output (Composite & S-Video)
- 5 S-Video Inputs
- 3 S-Video Outputs
- S2 Compatibility
- Audio/Video Front Panel input (S2-Video)
- Preamp Output
- Front Left, Front Right, Center, Rear Left, Rear Right, Subwoofer
- Gold-Plated Terminals on DVD/LD & CD Inputs
- Multi-Room/Multi-Source
- 2nd Zone A/V Output, 2nd Zone IR Control Input
- In/Out Pioneer System Remote (SR)
- Speaker Terminals A and B: Parallel
- Front Terminal Type: Banana
- Center Terminal Type: Banana
- Rear Terminal Type:Banana
- 3 AC Outlets
- Urushi Finish
- Control Door Design
- Function Indicator LED
Amplifier Section
- Continuous Average Power Output of 120 watts per channel, min. at 6ohms from 20Hz to 20KHz with no more than 0.09% total harmonic distortion
- 5-Channel Accurate Imaging System
- Front Channels: 120W + 120W
- Center Channel: 120W
- Rear Channels: 120W + 120W
- 335 mV/47k ohms Input (Sensitivity/Impedance)for VCR1, VCR2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE2
- 335 mV/2.2k ohms Output (Level/Impedance) for VCR1, VCR2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE2
- Frequency Response
- 20-20kHz, +-0.3dB for PHONO MM (RIAA Equalization)
- 5-100kHz, +0dB, -3dB for VCR1, VCR2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE2
- Signal-to-Noise Ratio (IHF'66/EIA)
- 72dB/75dB for PHONO MM
- 101dB/83dB for VCR1, VCR2, DVD/LD, TV/SAT, VIDEO, CD, MD/TAPE, TAPE2
- Usable Sensitivity (Mono) 13.2dBf (1.3 microV, 75 ohms)
- 5OdB Quieting Sensitivity: 20.2dBf (Mono) - 38.6dBf (Stereo)
- Signal-to-Noise Ratio at 85dBf: 73dB(Mono) - 70dBf(Stereo)
- Distortion 1kHz (Stereo):0.5%
- Frequency Response: 30-15kHz, +-1.0db
- Alternative Channel Selectivity: 60dB(400kHz)
- Stereo Separation:40dB (lkHz)
- Antenna input: 300 ohms balanced, 75 ohms unbalanced
- Sensitivity (IHF, Loop Antenna): 350 uV/m
- Selectivity: 25dB
- Signal-to-Noise Ratio: 50dB
- Loop Antenna
- 1Vp-p/75 ohms Input (Sensitivity/Impedance)
- 1Vp-p/75 ohmsOutput (Level/Impedance)
- 5Hz-10MHz, +0db, -dB Frequency Response
- 65dB Signal-to-Noise Ratio
- Power Requirements: 120V/60Hz
- Power Consumption: 460W
- Stand-by Power Consumption: 1.0W
- Dimensions: 169/16"W x 613/16"H x 181/2"D
- Dimensions without Package (WxHxD): 420mm x 173mm x 470mm
- Weight Without Package:32 lbs. 7 oz./14.7 kg
Pioneer Elite VSX-27TX Reviews
Thanks for taking a moment to learn about our "Verified" designations.
We employ verification processes to build credibility and promote product reviews.
Verified Buyer
An individual who has purchased the reviewed item from our company and submitted their review using a process that verifies purchase history. This designation ensures the actual buyer is reviewing the purchased item.
Verified Reviewer
An individual who has confirmed their email address using our validation process. This designation ensures that product reviewers are using their real email addresses.
Product Q & A
The full manufacturer's warranty from Pioneer Elite is only valid when the Pioneer Elite VSX-27TX is purchased from an Internet Authorized Dealer. We will match any Internet Authorized Dealer's best price on the Pioneer Elite VSX-27TX.
|
|
|
|
|
|
|
|
Copyright© 1997-2013 Your Electronic Warehouse
Designated trademarks and brands are the property of their respective owners.
