Attenuates the line-level signal going into an amplifier
Level control impedance: 100K Ohms
Infinitely variable attenuation
Requires 1-gang P-ring or electrical box at least 2-5/8" deep
Female RCA connectors
Approximate shipping weight: 1 lb.
Dimensions: 2-3/4" wide x 4-1/2" high, depth behind plate: 2-5/8"
There are installations where the use of a high-power volume attenuator such as our SCW-1 is not applicable. This would be the case if a single source was used to drive multiple power amplifiers. You would want to be able to attenuate the LINE-LEVEL-SIGNAL going into each amplifier. The LVW-1 was designed to do just that! The LVW-1 is a wall-mount stereo line-level attenuator and has a nominal input impedance of 100K ohms. The left and right channels are totally isolated. Therefore, the control will in no way contribute to any ground loops.
The full manufacturer's warranty from Niles Audio is only valid when the Niles Audio LVW-1 is purchased from an Internet Authorized Dealer. We will match any Internet Authorized Dealer's best price on the Niles Audio LVW-1. The Niles Audio LVW-1 may be referred to by the following terms: 760514001060, FG00103, FG00106, LVW-1 BONE, LVW-1 WHT.